PRODUCT CENTER
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
VIEW MORE +
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
Aluminium Steel Round Bars which exhibits exceptional corrosion resistance in chemical environments containing phosphoric acid, nitric acid, chlorides and sulphuric acid.
Aluminium 6061 Square Bars doesn’t losses it shape when exhibit to a temperature of liquid nitrogen which is also high appreciable and has a great commercial demand.
For applications requiring maximum ductility, Aluminium 6082 Flat Bars with low sulphur levels can be supplied by producers using ladle – refining techniques.
VIEW MORE +
Aluminium 6061 Square Bars doesn’t losses it shape when exhibit to a temperature of liquid nitrogen which is also high appreciable and has a great commercial demand.
For applications requiring maximum ductility, Aluminium 6082 Flat Bars with low sulphur levels can be supplied by producers using ladle – refining techniques.
6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
VIEW MORE +
Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
2024 aluminum alloy, the main alloying elements are copper and magnesium.
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable, general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
VIEW MORE +
Applications where high strength but low weight ratio is required, and good fatigue strength.
Not weldable, general processing performance.
Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
The mechanical properties of 2024-T3 aluminum alloy can be significantly improved after heat treatment.
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
VIEW MORE +
2024 is a typical duralumin alloy in the aluminum-copper-magnesium system.
It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
6082 is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance.
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
VIEW MORE +
It also has moderate strength and can maintain good operability after annealing.
It is mainly used in mechanical structure, including bars, plates, pipes and profiles.
CONTACT US
Tel：+86 15315558205
Whatsapp：+86 15315558205
Email：nicole@jyh-steel.com
Address : 5th Floor, Building 11, No. 6055, Jinhai Road, Fengxian District, Shanghai
GET A FREE QUOTE
Copyright @ 2023 Juyiheng Iron and steel factory. All Right Reserved. Powered by www.300.cn jinan Seo Tags BUSINESS LICENSE
